��׼�����ϲ���̳

• Kelley, M., Lee, A., Mozumdar, M., Dajani, K., and Ahmed, A., "Design and Modeling of Subpicosecond All-optical Modulator using the Nonlinear Response of Indium Tin Oxide," Journal of the Optical Society of America B, vol. 36, issue 8, pp. F149-F153, 2019.    

• Amouhadi, R., Veliz, V., Balali, V., and Aliasgari, M., “Optimization and Decision Making for Route Selection as an Alternative of Google Maps Considering Sustainability,” ASCE Intl Conf. on Computing in Civil Engineering (i3CE): Smart Cities, Sustainability, and Resilience, pp. 359-366, Atlanta, 2019.                  

• Asgari, S., Adams, H., Kasprowicz, M., Czosnyka, M., Smielewski, P., Ercole, A., "Feasibility of Hidden Markov Models for the Description of Time-varying Physiologic State after Severe Traumatic Brain Injury," Critical Care Medicine, vol. 47, issue 11, pp. e880-e885, Nov. 11, 2019.
• Asgari, S., Canac, N., Hamilton, R., Scalzo, F., "Identification of Pulse Onset on Cerebral Blood Flow Velocity Waveforms: A Comparative Study," BioMed Research Intl, 2019.
• Asgari, S., Scalzo, F., Kasprowicz, M., "Pattern Recognition in Medical Decision Support," BioMed Research Intl., 2019.
• Canac, N., Ranjbaran, M., O'Brien, M.J., Asgari, S., Scalzo, F., Thorpe, S.G., Jalaleddini, K., Thibeault, C.M., Wilk, S.J., Hamilton, R.B., "Algorithm for Reliable Detection of Pulse Onsets in Cerebral Blood Flow Velocity Signals," Frontiers in Neurology, vol. 10, 2019.
• Chen, A., Selvaraj, S., Krishnan, V., and Asgari, S., "Accuracy and Reliability of Onset Detection Algorithms in Gait Initiation for Healthy Controls and Participants with Parkinson’s Disease," J. of Applied Biomechanics, vol. 1, pp. 108, October 2019.
• Holland, A., and Asgari., S., "A Simple Unsupervised, Real-time Clustering Method for Arterial Blood Pressure Signal Classification," 41st Annual Intl. Conf. of the IEEE Engineering in Medicine and Biology Society, pp. 1509-1512, 2019.

• Balali, V., Zalavadia, A., and Heydarian, A., “Real-Time Interaction and Cost Estimating within Immersive Virtual Environments,” ASCE J. of Construction Engineering and Management, 2019.
• Mahanpoor, M., Monajjem, S., and Balali, V., “Sustainable Highway Maintenance: Optimization of Existing Highway Vertical Alignment Considering Pavement Condition,” J. of Sustainability, vol. 11, no. 6, pp. 1-20, 2019.
• Jahangiri, A., Ghanipoor Machiani, S., and Balali, V., “Big Data Exploration to Examine Aggressive Driving Behavior in the Era of Smart Cities,” Taylor & Francis J. of Data Analytics for Smart Cities, vol. 7, pp. 177-196, 2019
• Chandra, S., Balali, V., Kumar, V., and Thirumaleswara, N.R.,  “Quantification of Rail Transit Investments with Appropriate Measures and Metric,” 5th Conf. of Transportation Research Group of India, Bhopal, India, 2019.
• Amouhadi, R., Veliz, V., Balali, V., and Aliasgari, M., “Optimization and Decision Making for Route Selection as an Alternative of Google Maps Considering Sustainability,” ASCE Intl Conf. on Computing in Civil Engineering (i3CE): Smart Cities, Sustainability, and Resilience, pp. 359-366, Atlanta 2019.            
• Carneiro, J.P., Varnosfaderani, M.P., Balali, V., and Heydarian, A. (2019). “Comprehensible and Interactive Visualization of Spatial Building Data in Augmented Reality,” ASCE Intl Conf. on Computing in Civil Engineering (i3CE): Visualization, Information Modeling, and Simulation, pp. 79-86, Atlanta, 2019.                
• Hernandez, C., Slaton, T., Balali, V., and Akhavian, R., “A Deep Learning Framework for Construction Equipment Activity Analysis,” ASCE Intl Conf. on Computing in Civil Engineering (i3CE): Data, Sensing, and Analysis, pp. 479-486, Atlanta, 2019.     
• Amouhadi, R., Balali, V., Zuidgeest, M., and Heydarian, A., “Measuring Walkability using a Mobile Phone Sensors and Applications,” Transportation Research Board 98th Annual Meeting (TRB), issue 19-05297, Washington, D.C., 2019.                                  
• Tavakoli, A., Balali, V., and Heydarian, A., “A Multi-modal Approach for Monitoring Driving Behavior and Emotions,” Transportation Research Board 98th Annual Meeting (TRB), issue 19-05204, Washington, D.C., 2019.               
• Amouhadi, R., Khalilikhah, M., Balali, V., Lee, D.J.H., and Heydarian, A., “Assessing Gaps in High-Quantity Low-Cost Roadway Asset Data Collection: A Survey of the State-of-Art Sensing Technologies,” Transportation Research Board 98th Annual Meeting (TRB), issue 19-05307, Washington, D.C., 2019.    

• Barjasteh, E., Gouni, S., Sutanto, C., and Narongdej, P., “Bisphenol-A benzoxazine and Cycloaliphatic Epoxy Copolymer for Composite Processing by Resin Infusion,” J. of Composite Materials, vol. 53, issue 13, pp. 1777-1790, 2019.    
• Barjasteh, E., Sutanto, C., and Nepal, D., “Conductive Polyamide-Graphene Composite Fabric via Interface Engineering,” Langmuir, vol. 5, no. 6, pp. 2261-2269, 2019.                                                   
• Bannuelos, J., and Barjasteh, E., “Moisture Adsorption of the Benzoxazine-based Thermoset Matrix for Advanced Composite Applications,” Abstracts of Papers of the American Chemical Society, vol. 257, 2019.
• Hawkins, S., Maffe, A., Barjasteh, E., and Nepal, D. “Development of a Fundamental Understanding of the Curing Kinetics of Benzoxazine/Epoxy Blends via In Situ Fourier Transform Infrared Spectroscopy,” Abstracts of Papers of the American Chemical Society, vol. 257, 2019.   
• Yoozbashizadeh, M., Barjasteh, E., Roy, S., Ram, M. S., and Rai, S., “An Investigation into the Effects of Cure and Post-Cure Process Parameters on Out-Of-Autoclave Bismaleimide Composite Fabrication by Design of Experiments,” Applied Composite Materials, vol. 26, no. 2, pp. 627-641, 2019.                                              

• Bonifacio, J., Rahai, H.R., and Taherian, S., “Investigations of a Pipe-Jet with an Annular Cavity into Crossflow,” 14th Intl. Conf. on Heat Transfer, Fluid Mechanics, and Thermodynamics,” Wicklow, Ireland, July 22-24, 2019.                          

• Calabrese, A., Losanno, D., Spizzuoco, M., Strano, S. and Terzo, M., “Recycled Rubber Fiber Reinforced Bearings (RR-FRBs) as Base Isolators for Residential Buildings in Developing Countries: The Demonstration Building of Pasir Badak, Indonesia,” Engineering Structures, vol. 192, pp.126-144, 2019.                              
• Calabrese, A. and Kumawat, N., “Assessment of the Applicability of Recycled Rubber Fiber Reinforced Bearings (RR-FRBs) as Base Isolators of Residential Buildings in Developing Countries,” Structures Congress 2019: Blast, Impact Loading, and Research and Education, pp. 222-234, 2019.
• Calabrese, A., Spizzuoco, M., Strano, S. and Terzo, M., “Hysteresis Models for Response History Analyses of Recycled Rubber Fiber Reinforced Bearings (RR-FRBs) Base Isolated Buildings,” Engineering Structures, vol. 178, pp.635-644, 2019.
• Losanno, D., Spizzuoco, M. and Calabrese, A., “Bidirectional Shaking‐table Tests of Unbonded Recycled Rubber Fiber Reinforced Bearings,” Structural Control and Health Monitoring, vol. 26, no. 9, p.e2386, 2019.   

• Su, P., and Chae, E.J., “Aerodynamic Characteristics of the Continuously Morphing Trailing Edge,” SPIE Smart Structures/NDE, Denver, March 3-7, 2019.
• Zhou, Q., Kim, J., Han, K., Oh, S., Umrao, S., Chae, E.J., and Oh, I., “Structurally Reliable Triboelectric Nanogenerator with Hierarchically Nanostructured Cu NWs-Cu Mesh Electrode,” Nano Energy, vol. 59, pp. 120-128, 2019.        

• Chandra, S., Balali, V., Kumar, V., and Thirumaleswara, N.R., “Quantification of Rail Transit Investments with Appropriate Measures and Metric,” 5th Conf. of Transportation Research Group of India, Bhopal, India, 2019.
• Chandra, S., Nguyen, H., and Nguyen, A., "Evaluating Critical Gas Pipeline Crossings for Freight Truck Routes," Case Studies on Transport Policy, vol. 7, no. 4, pp. 680-688, 2019.
• Chandra, S., Thirumaleswara Naik, R., and Jimenez, J., "Crowdsourcing-based Traffic Simulation for Smart Freight Mobility," Simulation Modelling Practice and Theory, vol. 95, pp. 1-15, 2019

Dr. Aisha Chen     

• Chen, A., Selvaraj, S., Krishnan, V., and Asgari, S., "Accuracy and Reliability of Onset Detection Algorithms in Gait Initiation for Healthy Controls and Participants with Parkinson’s Disease," J. of Applied Biomechanics, vol. 1, pp. 108, October 2019.

• Demircan, E., Teng, H.L., Recinos, E., Abella, J.R., Khoo, I.-H., and Wu, W., "Subject Perceived Haptic Feedback during Different Mode and Number of Motors," Intl. Society of Biomechanics/American Society of Biomechanics, 2019.                               
• Demircan, E., Recinos, E., Abella, J.R., Khoo, I.-H., Teng, H.-L., and Wu, W., "Perception Accuracy of Vibrotactile Feedback during Locomotion," IEEE Intl. Conf. on Ubiquitous Robots (UR), 2019.
• Recinos, E., Henry, M., and Demircan, E., "A Virtual Reality Environment with Haptic Feedback for Psychological Rehabilitation for Soccer Athletes," IEEE Intl. Conf. on Ubiquitous Robots (UR), 2019.
• Abell, J.R., and E. Demircan "A Multi-body Simulation Framework for Live Motion Tracking and Analysis within the Unity Environment," IEEE Intl. Conf. on Ubiquitous Robots (UR), 2019.

• Quon, A., Khan, A.A., Dhillon, N.S., “Theoretical Modeling of thermal transients in a PCM substrate during drop impact”, Proc. ASME Summer Heat Transfer Conference (SHTC) 2019, Bellevue, Wash., HT2019-3648
• Basavanna, A., Khapekar, P., Dhillon, N.S., “Effect of a High Electric Field on the Thermal and Phase Change Characteristics of an Impacting Drop,”, Proc. ASME Summer Heat Transfer Conference (SHTC) 2019, Bellevue, Wash., HT2019-3649    
• Dhillon, N.S., “A Planar Evaporator Design to Counter Parasitic Heat Flow during Device Startup of a Microscale Loop Heat Pipe,” Proc. ASME Summer Heat Transfer Conf. (SHTC), Bellevue, Wash.,HT2019

• Fu, B., Steichen, B., “Using Behavior Data to Predict User Success in Ontology Class Mapping – An Application of Machine Learning in Interaction Analysis,” Proc. of the IEEE 13th International Conference on Semantic Computing (ICSC) 2019, pp. 216-223. (Best Paper Nominee)               
• Fu, B., Steichen, B., Zhang, W., “Towards Adaptive Ontology Visualization - Predicting User Success from Behavioral Data,” Intl. J. of Semantic Computing, vol. 13, issue 4, pp. 431-452, 2019.                                   
• Steichen, B., and Fu, B., “Towards Adaptive Information Visualization - A Study of Information Visualization Aids and the Role of User Cognitive Style,” Frontiers in Artificial Intelligence,” 2019.                                                                              

• Haddad, M., Bazinet, L., Barbeau, B., “Eco-efficient Treatment of Ion Exchange Spent Brine via Electrodialysis: Contribution of Ion Exchange Membrane Specifications and Pulsed Electric Field to Pure NaCl Recovery and Minimum Waste Disposal,” Science of the Total Environment, vol. 690, pp. 400-409, 2019.                         
• Pourahmad, H., Haddad, M., Claveau-Mallet, D., and Barbeau, B., “Impact of Media Coating on Simultaneous Manganese Removal and Remineralization of soft water via calcite contactor: experimental and modeling (2019), Water Research, 116, pp. 601-609
• Haddad, M., Barbeau, B., “Hybrid Hollow Fiber NF-Calcite Contactor as a Point of Entry Treatment Method to Remove Mn, Fe, hardness and NOM from Domestic Groundwater Supplies,” Membrane, vol. 9, issue 7, p. 90, 2019.                       
• Haddad, M., Oie, C., Vo Duy, S., Sauvé, S, Barbeau, B., “Adsorption of Micropollutants Present in Surface Waters onto Polymeric Resins: Impact of Resin Type and Dosage, Contact Time and Water pH and Temperature,” Science of the Total Environment, vol. 660, pp. 1449-1458, 2019.     

• Hong, J.G., and Dhadake, Y., “Performance Determining Properties of Custom-made Membranes in Reverse Electrodialysis Application,” 2019 IEEC and BWR Intl. Environmental Engineering Conf., Busan, South Korea, December 2019.               
• Hong, J.G., Gao, H., Gan, L., Tong, X., Xiao, C., Liu, S., Zhang, B., and Chen, Y., “Nanocomposite and Nanostructured Ion-exchange Membrane in Salinity Gradient Power Generation Using Reverse Electrodialysis,” Advanced Nanomaterials for Membrane Synthesis and its Applications, pp. 295-316, 2019.                            
• Hong, J.G., Park, T., and Dhadake, Y., “Property Evaluation of Custom-made Ion Exchange Membranes for Electrochemical Performance in Reverse Electrodialysis Application,” J.of Electroanalytical Chemistry, vol. 850, p. 113437, 2019.                                                                                

• Chang, Y.-I., Chen, J.-W., Cheng, W.-Y., Jang, L., "The Reuse of Wastewater in Making PVA Sponge," J. of Water Process Engineering, vol. 30, p. 100476, 2019.
• Chang, Y.-I., Liao, K.-Y., Jang, L., "New Correlations for the Initial Collection Efficiency of Brownian Aerosol Particles with the Bounce-off Effect Considered in Granular Filtration," Separation and Purification Technology, vol. 229, p. 115586, 2019.

• Kalman, J., Smith, D., Miller, K., Bhattacharia, S., Bratton, K.R., Pantoya, M.L., "A Strategy for Increasing the Energy Release Rate of Aluminum by Replacing the Alumina Passivation Shell with Aluminum Iodate Hexahydrate (AIH)," Combustion and
• Ferman, Z., and Kalman, J., "Theoretical Uncertainty Analysis of a High-Temperature Ammonia Diagnostic," Fall 2019 Meeting of the Western States Section of the Combustion Institute, Albuquerque, N.M., Oct. 14-15, 2019.                            
• Hedman, T.D., Kalman, J., Davis, N.D., Quigley, J.N., Bojko, B.K., "On the Regression Rate of Solid Ramjet Fuels," JANNAF J. of Propulsion and Energetics.                  
• Hill, K.J., Pantoya, M.L, Washburn, E., and Kalman, J., "Single Particle Combustion of Pre-Stressed Aluminum," Materials, vol. 12, p. 1727, 2019.                            
• Kellogg, R., Hedman, T., Lapidus, S., and Kalman, J., "Synchrotron Based Measurement of the Temperature Dependent Thermal Expansion Coefficient of Ammonium Perchlorate," Propellants, Explosives, Pyrotechnics, 2019.
• Kellogg, R., Hedman, T., Lapidus, S., and Kalman, J., "Synchrotron Based Measurement of the Temperature Dependent Thermal Expansion Coefficient of Ammonium Perchlorate," U.S. National Meeting of the Combustion Institute, Pasadena, Calif., March 24-27, 2019.                        
• Mauer, M., Bojko, B., Byrd, E., and Kalman, J., "Ray Tracing Calculations in Simulated Propellant Flames with Detailed Chemistry," Applied Optics, vol. 58, issue 6, pp. 1451-1459, 2019.                        
• Tolmachoff, E., Hedman, T., Essel, J., Kalman, S., and Kalman, J., "Low Temperature Decomposition of Ammonium Perchlorate in the Presence of Catalyst," U.S. National Meeting of the Combustion Institute, Pasadena, Calif., March 24-27, 2019.    

• Van, L., Khoo, I.-H., Chen, P., and Reddy, H., "Symmetry Incorporated Cost-Effective Architectures for Two-Dimensional Digital Filters," IEEE Circuits and Systems Magazine, vol. 19, issue 1, 2019.                                    
• Teng, H., Demircan, E., Abella, J., Recinos, E., Khoo, I.-H., and Wu, W., "Subject Perceived Haptic Feedback during Different Mode and Number of Motors," 27th Congress of the Intl Society of Biomechanics (ISB2019), July 2019.                               
• Demircan, E., Recinos, E., Abella, J., Khoo, I.-H., Teng, H., and Wu, W., "Perception Accuracy of Vibrotactile Feedback during Locomotion," Proc. 16th Intl. Conf. on Ubiquitous Robots (UR), June 2019.         

• Dominguez, S., and Kim, J.J., “Analyzing Heavy Civil Construction Equipment Emission Factors In Terms of Feasibility,” Bienvenida Poster Presentations, CSULB, 2019.                               
• Huang, S., Vivanco, D., and Jim, J.J., “BIM-based LEED Evaluation Model for Sustainability Requirements of LEED Certification,” 6th Annual Spring Research Symp.,CSULB Undergraduate Research Opportunity Program, 2019.                           
• Ozturk, M., and Joseph J. Kim, “A Comparative Analysis of Sustainability Assessment Tools for Transportation Projects,” Proc.2019 US-Korea Conf. Science, Technology, and Entrepreneurship, 2019, p. 57, 2019.                           
• Palikhe, S., Kim, S., and Kim, J.J., “Critical Success Factors and Dynamic Modeling of Construction Labour Productivity,” Intl. J. of Civil Engineering, vol. 17, issue 3, pp. pp. 427-442, 2019.                       

• Doan, S., Kwon, S., and Yeh, H.G., “Achievable Capacity of Multi-Polarization MIMO (MP-MIMO) toward 6G Wireless Communications,” IEEE Green Energy and Smart Systems Conf., 2019.     
• Lee, I.H., Kim, J.B., Jung, H., Kwon, S.C.S., Kurniawan, E., "Advanced Wireless Technology for Ultrahigh Data Rate Communication," Wireless Communications and Mobile Computing, 2019.                               

• George, D., Garcia, A, Pham, Q., Perez, M. R., Deng, J., Nguyen, M. T., Zhou, T., Martinez-Chapa, S.O., Won, Y., Liu, C., Lo, R.C., Ragan, R., Madou, M., “Fabrication of Patterned Graphitized Carbon Wires using Low Voltage Near-field Electrospinning, Pyrolysis, Electrodeposition and Chemical Vapor Deposition,” Nature Microsystems and Nanoengineering. October 2019.                                  
• George, D., Hernandez, E.A P., Lo, R.C., and Madou, M., “Folding Polymer Polyhedral through Spatially Selective Cross-linking and Thermally Controlled Capillary Deformation,” Soft Matter, vol. 15, pp. 9171-9177, 2019. 

• Moghtadernejad, S., Jadidi, M., Ahmmed, KMT, Lee, C., Dolatabadi, A., “Experimental Study of Droplet Shedding on Laser-patterned Substrates,” Physics of Fluids, vol. 31, issue 12, 2019.                            
• Moghtadernejad, S., Escotet-Espinoza, M.S., Liu, Z., Schäfer, E., and Muzzio, F., “Mixing Cell: A Device to Mimic Extent of Lubrication and Shear in Continuous Tubular Blenders,” AAPS PharmSciTech, vol. 20, issue 7, p. 262, 2019.                          
• Escotet-Espinoza, M.S., Moghtadernejad, et al, “Effect of Material Properties on the Residence Time Distribution (RTD) Characterization of Powder Blending Unit Operations, Part II, Application of Models,” Powder Technology vol. 344, pp. 525-544, 2019.
• Escotet-Espinoza, M.S., Moghtadernejad, et al, “Effect of Tracer Material Properties on the Residence Time Distribution (RTD) of Continuous Powder Blending Operations, Part I: Experimental Evaluation,” Powder Technology vol. 342, pp. 744-763, 2019.       
• Harper, J., Moghtadernejad, S., “Determining Pharmaceutical Powder Wettability,” AIChE Annual Meeting, 2019.                                                                     

• Coleman, T., Moon, J., "A Biometric for Shark Dorsal Fins based on Boundary Descriptor Matching, Proc. 32nd Intl. Conf. on Computer Applications, 2019.
• Moon, J., Eulenstein, O., "The Cluster Affinity Distance for Phylogenies," Intl. Symp. on Bioinformatics Research and Applications, pp. 52-64, 2019.
• Choi, S.I., Moon, J., Park, H.C., Choi, S.T., "User Identification from Gait Analysis Using Multi-Modal Sensors in Smart Insole," Sensors, vol. 19, issue 17, p. 3785, 2019.

• Morales-Ponce, Oscar, "Visiting Infinitely Often the Unit Interval While Minimizing the Idle Time of High Priority Segments," Intl. Colloquium on Structural Information and Communication Complexity, pp. 361-365, July 2019.

• Taherian, S., Rahai, H.R., Lopez, S., Shin, J., and Jafari, B., 2019, “Evaluation of Human Obstructive Sleep Apnea Using Computational Fluid Dynamics,”   Communications Biology, November 2019.
• Bonifacio, J., Rahai, H.R., and Taherian, S., “Investigations of a Pipe-Jet with an Annular Cavity into Crossflow,” 14th Intl. Conf. on Heat Transfer, Fluid Mechanics, and Thermodynamics,” Wicklow, Ireland, July 22-24, 2019.                

• Safari, M.S., Pourahmadi, V., and Sodagari, S., "Deep UL2DL: Data-Driven Channel Knowledge Transfer from Uplink to Downlink," IEEE Open J. of Vehicular Technology, 2019.            

• Taherian, S., Rahai, H.R., Lopez, S., Shin, J., and Jafari, B., 2019, “Evaluation of Human Obstructive Sleep Apnea Using Computational Fluid Dynamics,”   Communications Biology, November 2019.
• Bonifacio, J., Rahai, H.R., and Taherian, S., “Investigations of a Pipe-Jet with an Annular Cavity into Crossflow,” 14th Intl. Conf. on Heat Transfer, Fluid Mechanics, and Thermodynamics,” Wicklow, Ireland, July 22-24, 2019.

• Yang, Y., “Improved Benders Decomposition and Feasibility Validation for Two-Stage Chance-Constrained Programs in Process Optimization,” Industrial and Engineering Chemistry Research, vol. 58, pp. 4853-4865, 2019.       
• Yang, Y., and dela Rosa, L., “Designing a Robust Gasoline Blending Recipe via Scenario-Based Optimization,” IEEE Green Energy and Smart System Conf., 2019
• Yang, Y., et al., “A Mixed Integer Nonlinear Program based Power Load Estimator for Distribution Grid,” IEEE Systems J., 2019.
• Yang, Y., et al., “Optimal Control Methods for photovoltaic Enabled Grid with Abnormal Power Loads,” IEEE Systems J., 2019.   
• Yang, Y., J. Kelly, Efficient Real-time Optimization Using a data-driven piecewise affine model, Computers & Chemical Engineering, 125, pp. 545-557, 2019.
• Yang, Y., Sutanto, C., “Chance-Constrained Optimization for Nonconvex Programs Using Scenario-Based Methods,” ISA Transactions, vol. 90, pp. 157-168, 2019.
• Karan, S., Meese, E., Yang, Y., Yeh, H.G., Lowe, C.G., and Zhang, W., “Classification of Shark Behaviors using K-Nearest Neighbors,” IEEE Green Energy and Smart Systems Conf., 2019.
• Zhang, W., Martinez, A., Meese, E., Lowe, C.G., Yang, Y., and Yeh, H.G., “Deep Convolutional Neural Networks for Shark Behavior Analysis,” IEEE Green Energy and Smart Systems Conf., 2019.

• Yeh, H.G., Sim, S., and Bravo, R., “Wavelet and De-noising Techniques for Real-Time HIF Detection in 12 kV Distribution Circuits,” IEEE Systems J., vol. 13, no. 4, pp. 4365-4373, Dec. 2019.
• Yeh, H.G., “Design Adaptive MIMO Space-Time-Frequency Conjugate Two-Path OFDM Systems,” IEEE Systems J., vol. 13, no. 3, pp. 2443- 2453, Sept. 2019.
• Yeh, H.G., “Space-Frequency Conjugate Two-Path Transmission for Precoded OFDM Systems,” IEEE Trans. on Circuits Syst. II, Exp. Briefs, vol. 66, no. 4,   pp. 587-591, April 2019.
• Doan, S., Kwon, S., and Yeh, H.G., “Achievable Capacity of Multi-Polarization MIMO (MP-MIMO) toward 6G Wireless Communications,” IEEE Green Energy and Smart Systems Conf., 2019.
• Karan, S., Meese, E., Yang, Y., Yeh, H.G., Lowe, C.G., and Zhang, W., “Classification of Shark Behaviors using K-Nearest Neighbors,” IEEE Green Energy and Smart Systems Conf., 2019.
• Zhang, W., Martinez, A., Meese, E., Lowe, C.G., Yang, Y., and Yeh, H.G., “Deep Convolutional Neural Networks for Shark Behavior Analysis,” IEEE Green Energy and Smart Systems Conf., 2019.

• Honkawa, D. and Yoozbashizadeh, M. “Modular Liquid Propellant Launch Vehicle Design,” AIAA Propulsion and Energy, 2019.                              
• Yoozbashizadeh, M., Barjasteh, E., Roy, S., Ram, M. S., and Rai, S., “An Investigation into the Effects of Cure and Post-Cure Process Parameters on Out-Of-Autoclave Bismaleimide Composite Fabrication by Design of Experiments,” Applied Composite Materials, vol. 26, no. 2, pp. 627-641, 2019.
• Khoshnevis, B., Yoozbashizadeh, M., and Ershaghi, I., “Water Unloading of Gas Wells by the Concurrent Water Collection (CWC) Method,” SPE Production and Operations J., vol. 34, issue 3, pp. 473-484, 2019.             
• Yoozbashizadeh, M., Chartosias, M., Decker, D., and Victorino, C., “Investigation on the Effect of Process Parameters in Atmospheric Pressure Plasma Treatment on Carbon Fiber Reinforced Polymer Surfaces for Bonding,” Materials and Manufacturing Processes J., vol. 34, issue 6, pp. 660-669, 2019.                                
• Yoozbashizadeh, M., and Khoshnevis, B., “The Effects of Sintering Conditions on Additive Manufacturing for Bronze by Selective Inhibition Sintering (SIS) Process,” 3D Printing and Additive Manufacturing J., 2019.                  

• Zhang, W., Martinez, A., Meese, E., Lowe, C.G., Yang, Y., and Yeh, H.G., “Deep Convolutional Neural Networks for Shark Behavior Analysis,” IEEE Green Energy & Smart Systems Conf., 2019.
• Fu, B., Steichen, B., Zhang, W., “Towards Adaptive Ontology Visualization - Predicting User Success from Behavioral Data,” Intl. J. of Semantic Computing, vol. 13, issue 4, pp. 431-452, 2019.
• Karan, S., Meese, E., Yang, Y., Yeh, H.G., Lowe, C.G., and Zhang, W., “Classification of Shark Behaviors using K-Nearest Neighbors,” IEEE Green Energy & Smart Systems Conf., 2019.